Home › Guides › Batch ZIP Export

How to Batch Compress Images and Export a ZIP

By Ryan • Updated November 18, 2026 • 8 min read

A folder of product photos wants the same width, the same format, and a crop that puts the object in the same place. It does not want one slider applied blindly to twenty different frames, and it does not want a ZIP of the camera originals. The studio can hold a batch. It will not invent a shared preset you did not set on each thumbnail.

What you get: each thumbnail stores its own crop, size, quality, format, and watermark. The ZIP is always downloaded as simplycompress_batch.zip. Files inside are named from the original basename plus the export width. Two originals with the same basename collide. Zip compression does not meaningfully shrink JPEGs, so resize before you pack.

What the batch studio actually remembers

Image Studio accepts several files at once. Drop them on the home page, or pick a multi-file selection. Anything the browser does not treat as an image is skipped. If nothing in the drop is an image, the page says so. Each file that does load becomes a thumbnail with its own saved state: crop, aspect-ratio preset, quality, format, target width, target height, and watermark settings.

The defaults are quality 80 and the file's own type as the format. A folder of JPEGs stays JPEG until you change the dropdown. A PNG stays PNG, and the quality slider will not shrink a PNG, because the PNG encoder ignores it. If you wanted every product photo as WebP, you have to set WebP on each thumbnail, or set it once on the first image before you have switched away and then repeat it. There is no "apply this format to all" button. That is worth knowing before you assume the fifth image inherited the first image's dropdown.

Switching thumbnails saves the one you are leaving and loads the one you clicked. Change the crop, then click another thumbnail, and the crop is stored. If you change settings and immediately click Download All (ZIP), the studio saves the active image first, so the image on screen is included with the settings you see. You do not have to click away from the last one.

A product-photo pass that stays consistent

  1. Put the originals in a folder and leave them there. The ZIP is a set of derivatives.
  2. Decide the frame before you drop anything. A catalog grid is often a 1:1 crop at 1600 × 1600, or a 4:5 crop if the products are tall. Social sizes, if that is the destination instead, are listed in the social sizes guide.
  3. Drop the set. Click the first thumbnail. Choose the aspect preset. Drag the crop so the product sits in the same place you will want on the second photo. Set width and height to the export pixels, matching that aspect so the studio does not stretch.
  4. Choose WebP for a shop you control, or JPEG if the files have to go into a marketplace that rejects WebP. Slider around 80. Look at one highlight and one label on the product with the comparison view.
  5. Click the next thumbnail and repeat the same numbers. The crop position will differ because the object differs. The width, format, and quality should not.
  6. Click Download All (ZIP). The archive is always named simplycompress_batch.zip. Rename it on disk to something that says which shoot it was. The studio will overwrite that same download name next time.

Inside the ZIP, each file is named simplycompress_, plus the original basename, plus the export width, plus the extension. Two originals with the same basename (two scans both called IMG_0001.jpg from different cards, or a file and a copy) will collide. JSZip stores one path. Rename the originals so the basenames differ before you drop them, or you will silently keep one of the pair.

How many files, and how large

There is no coded cap at 30 files or 30 MB. The earlier "Max 30MB" line on the drop zone was a hint that did not match the code, and it has been removed. The real limit is memory. Each image is decoded to a bitmap. A dozen 24-megapixel photos are on the order of a gigabyte of RGBA if they are all decoded at full size (one 6000 × 4000 frame is 96 MB at 4 bytes a pixel, times twelve). The studio holds them as object URLs and decodes as it works, and a phone will still quit.

Practical batch: tens of photos, not hundreds, and resize them rather than exporting at camera resolution. If the tab becomes sluggish, split the folder and run two ZIPs. Close other heavy tabs. The work happens in this tab, which is also why the files are not uploaded. That boundary is described precisely in What Leaves Your Browser.

A ZIP of JPEGs or WebPs is not much smaller than the sum of the files. Those formats are already compressed. The ZIP is a convenience for downloading one archive, not a second compression stage. Do not zip first and expect the mailbox problem to go away. Resize first. Mail limits and the Base64 margin are in Shrink Photos for Email and Upload Limits.

Watermarks, per image

The watermark controls are part of the per-image state. You can stamp the first ten photos and leave the eleventh clean. The control is off until you enable it. Defaults when you do: text reading "SimplyCompress" (change it), opacity 0.3, scale 15% of the image, position bottom-right.

Text or a logo image both work. A logo should be a PNG with a transparent background, or you will stamp a rectangle. Positions are center, tile, and the four corners. The tile path draws the mark on a grid, rotated about 30 degrees. Opacity at 0.3 is visible on a light sky and weak on a dark product. Look at one bright frame and one dark frame before you run the whole set.

A watermark is a label. It is not redaction. The pixels under a translucent word are still in the file, and a motivated editor can often see them. If a license plate, a face, or an account number has to be gone, crop it out or paint it out with an opaque shape in an editor, then export. Do not put a 30% word over it and call the photo safe. The PDF version of this mistake, a black box that does not remove the text operators, is covered in Remove Hidden PDF Metadata.

The PDF Suite has its own text stamp (Helvetica Bold, a single string, center rotated about 30 degrees, or a corner). It does not increment a Bates number. If you need a real Bates sequence, this is not that tool. Image watermarks also do not travel automatically when you click Send to PDF except in the sense that the image is already flattened with the mark painted into the pixels before the PDF is built. The page-size consequences of that handoff are in Images to PDF.

Check one file before you trust the archive

Open the ZIP and open two files, not zero. Confirm the pixel dimensions, the format, and that the crop matches. Confirm two files that started with similar names both exist. Confirm a watermarked file and, if you meant to, an unwatermarked one. The studio does not show a manifest.

For a website, unzip and upload the images as separate URLs. A page cannot paint a picture from inside a ZIP. The srcset pattern for those separate files is in the Core Web Vitals guide. For a client delivery, the ZIP is the delivery. Rename it. Keep the camera originals out of the same archive unless the client paid for them and you meant to include the GPS tags, which the studio's new files no longer have.

Single-file download still exists on the active thumbnail, and Send to PDF hands every image in the batch to the PDF Suite as already-encoded files. Use that when the destination is one document. Use the ZIP when the destination is a folder of pictures.

A shoot, the next morning

Event photos and real-estate sets fail in the same way. The camera card has two hundred frames, twenty of them are the ones a person asked for, and the rest are focus checks. Do not drop the card. Copy the twenty into a folder, rename them so the basenames say which room or which speaker, then drop that folder. The studio will happily encode the blurry in-between frames if you hand them over, and you will then have to sort the ZIP.

Decide the long edge once and write it on a note. A listing photo that will be uploaded to a portal is often fine at 2000 pixels on the long side, JPEG, slider around 80. A speaker photo for a recap page is a crop, often 4:5 or 1:1, at the size in the social sizes guide if it is also going to Instagram. Mixing a 6000-pixel export and an 800-pixel export in one ZIP is allowed, because settings are per thumbnail, and it is also how a client receives a set they cannot use as a set. Keep one size unless you are deliberately making a web size and a print size, and in that case make two ZIPs and name them.

Leave the camera originals out of the archive you send. They are larger, they still contain GPS if the camera wrote it, and the client who asked for "the photos, smaller" did not ask for the masters. Keep the masters in the folder you started from. The studio never deletes them. If a crop was wrong, you still have the frame.

When the tab feels hot or the previews stall, stop adding files. Finish the ZIP you have, reload the page so the decoded bitmaps are gone, and start the next group. Reloading is safe because nothing was uploaded and nothing is saved until you download. It is also destructive of the crops you have not downloaded yet. Download first, then reload.

Frequently Asked Questions

Is there a 30 MB or 30-file limit?

No fixed cap is enforced in the code. Memory is the limit. A 6000 × 4000 image is about 96 MB of RGBA while decoded. Do tens of photos, not hundreds, and resize them rather than exporting camera resolution.

Does the first image's format apply to the rest?

No. The default format is each file's own type, and quality starts at 80. There is no apply-to-all button. Set WebP, or whatever you chose, on each thumbnail you want changed.

Will two files named photo.jpg both survive in the ZIP?

Only if their basenames differ. The archive path is simplycompress_, the basename, the width, and the extension. Rename duplicates before you drop them.

Does a watermark redact what is under it?

No. It paints a label. At the default opacity of 0.3 the pixels underneath are still in the file. Crop or cover private details opaquely. Do not use a translucent word as redaction.

Drop a set and export one archive

The ZIP button appears once more than one image is loaded. Check two files inside it before you send the archive.

Open Image Studio